Our Products
Laboratory Glassware & Equipment
Industrial Ovens
Pharmaceutical Test Equipments
 
 
 
Home » Products » Laboratory Glassware & Equipment » Laboratory Hot Plate

Laboratory Hot Plate

<< Previous   Laboratory Hot Plate   Next >>

Product Code : 15      Brand Name :UTS

Product Specification

UTS - LABORATORY HOT PLATE

  • Unique design of outer MS body having powder coated with gap of cast Iron top from the body
  • Kanthal A-1 superior quality coil shaped heater duly embedded in the cast Iron plate to avoid heat loss having Cera Blanket Insulation
  • All electrical connection are fire proof having sleeve for Heat/Temperature Protection
  • Temp. Range is from Ambient to 300oC
  • Temp. Controlled by sunvic Energy Regulator having marked 0-100, at minimum position it release minimum energy & at max. position it release max. energy
  • Cast Iron top is having 7.5 Diameter having heat resistant Paint
  • Optional : Can be supplied with Thermostate control in place of ER

 Applications :

Laboratory use : for educational Institute Hospital, Research Lab. Bio Tech Lab. & Pharmaceutical Industries

 Specifications :

Model
UTS 1.27
UTS 1.27 A
UTS 1.27 B
UTS 1.27 C
UTS 1.27 D


       
Size
7.5" Dia
10" x 12" x 6"
Rectangular
16" x 10" x 6"
Rectangular
18" x 10" x 6"
Rectangular
24" x 18" x 6"
Rectangular
Heater "W" Wattage
1.5 KW
1.5 KW
1.5 KW
2.0 KW
3.0 KW

Dimensions are expressed in (B x L x H)


  Technical Parameters :

Control Panel :   Energy Regulator, Temp. Indicator & Load Indicator
Housing Material :   CRC / MS Sheet duly Powder Coated
Optional :  

All S.Steel on request, thermostate in place of ER

Duty Cycle :  

Continuous
Power Consumption :   220/230V AC Supply 50Hz Single Phase

UTS - MAGNETIC STIRRER

  • Better low speed stirring with even small liquid volume
  • Better quality motor for higher Torque at low speeds
  • Stirring accomplished by small Teflon coated magnetic paddle
  • Paddle size as per Magnetic stirrer cap. Requirement
  • Accurate speed control & Temperature control
  • S. Steel 304 grade Top housing
  • Better quality Kanthal heaters all fire proof wiring connection better durability
  • Designed to reduce the fumes entrance in the unit

 Applications :

For Medical, Research Institute, Bio-Tech Pharmaceutical Agriculture, Food Industries

 Specifications :

Model
UTS 1.20
UTS 1.20 A
UTS 1.20 B


   
Capacity (L)
1 Liter
2 Liter
5 Liter
Heater Wattage "W"
150W
300W
500W
Dimension (Approx)
160 x 200 x 160
160 x 200 x 160
175 x 225 x 185

Dimensions are expressed : (Width x Depth x Height)

  Technical Parameters :

Control Panel :   Speed Regulator, Temp. Indicator & Mains
Housing Material :   CRC/ MS sheet duly powder coated
Optional :   All S. Sheet body having S. Steel Top Magnetic Stirrer without hot plate having different dimension
Duty Cycle :   Continuous
Power Consumption :  

220/230V AC supply 50Hz Single Phase

UTS - HEATING MANTEL

  • Small & Large capacity Mantle
  • Electrical Heated hard knitted glass yarn without joint
  • One pcs. Spun body made from non-rusting Alum. Duly powder coated & stove enamel painted
  • Full feature panel with ER / Temp. Controller, Temp. Indictor & Mains Switch
  • Better mineral / Glasswool Insulated
  • Useful for heating inflammable liquids

 Applications :

For Research Lab. Pharmaceutical Chemical/ Glass Plants, Bio Tech Lab, Educational Institute.

 Specifications :

Model
UTS 1.18
UTS 1.18 A
UTS 1.18 B


 
Capacity (L)
250 ml, 500 ml
1 Liter, 2 Liter
3,4,5 Liter
  1. Heater Wattage "W"

200W, 200W

300W, 450W

2 x 300W
2 x 500W
2 x 500W

  Technical Parameters :

Temperature Range :  

Ambient to 350oC

Power Consumption :  

220/230V AC +-10% 50Hz
Housing Material :   One Pcs. Alum. Spun body Painted/ Powder Coated
Insulation :  

Mineral / Glasswool

Optional :   Double Colour body (On customer request)
Control Panel :  

ER, Temp. Indicator & Mains Switch

UTS - WATER STILL

  • Precise pure Pyrogen free distilled water Design feature ensure economy in operation
  • All S. Steel 304 grade body
  • Unique design of water over flow & water level & outlet
  • Kanthal A-1 super quality kettle element for better result / ejection type
  • Condenser tube & Jacket all made of S. Steel 304 grade sheet / pipe
  • Condenser tube can be dismantled by removing the wing nut which holds condenser & Jacket
  • With wall bracket to be fixed on wall on which the still can rest

 Applications :

Useful for Hospitals, Medical Research lab. Biotech lab. & Industrial application etc.

 Specifications :

Model
UTS 1.14
UTS 1.14 A
UTS 1.14 B




Capacity (Ltrs.)
2
4
6
Heater Wattage "W"
1.5 KW
3 KW (2 x 1.5KW)
4.5 KW (3 x 1.5 K W)

Table Model : All S. Steel Construction as mentioned above Technical parameters remain same

Model II
UTS 1.14 C
UTS 1.14 D



Capacity
4 Liter Table Model
Cap. 10 Liter (On Customer request)
6 Liter Table Model

    Technical Parameters :

Duty Cycle :   Check water Level at regular interval
Power Consumption :  

220/230V AC +-10% 50Hz single phase

Material :  

All Stainless Steel 304 grade

Other Products in 'Laboratory Glassware & Equipment' category
Oil Bath
Oil Bath 		Laboratory Electrical Muffle Furnace
Laboratory Electrical Muffle Furnace 		Precision Laboratory Incubator
Precision Laboratory Incubator 		Precision Laboratory Water Bath
Precision Laboratory Water Bath 		Orbital Shaking Incubators
Orbital Shaking Incubators 		Laboratory Equipments
Laboratory Equipments
 
View all products(14)
 
<< Back


Production Unit:

Address:

Sector-3, Pocket G-125, DSIDC Industrial Area,
Bawana, Delhi, India

Contact Persons:

Mr. S. K. Gaur (Director): +919811059204
Mr. Amit Sharma (Marketing Head): +919811285965.

UNI-TECH SALES
D-26/11, Gali No. 4-C, Anand Prabat, Industrial Area, New Rohtak Road, New Delhi - 110005, India
Phone : 91-11-28763069/28761165
Fax : 91-11-28761165
Mr. S. K. Gaur (Director - Sales)

Mobile : +919811059204
Mr. Amit Sharma (Marketing Head)

Mobile : +919811285965
 unitech_s@yahoo.com
Contact Now
Send SMS
Copyright © 2011-12 by UNI-TECH SALES All Rights Reserved.